Has the algorithm for fdesign changed in Signal Processing Toolbox

Has the algorithm for fdesign changed in  Signal Processing Toolbox 6.13 (R2010a) as compared to the previous versions? I am using fdesign.decimator to design an equiripple filter with given specifications. I have recently upgraded from R2007b to R2010a. In R2007b, this code output a filter with 89 coefficients, but the same code in R2010a results in a filter with 127 taps. This is breaking compatibility for my downstream code as I am using the filter and the signal output from the filter as a reference to compare with my filter  code written in assembly.   Compare the output generated by the following code in R2007a and R2010a:   Fpass = 3400; % Passband Frequency Fstop = 4000; % Stopband Frequency Apass = 0.01; % Passband Ripple (dB) Astop = 80; % Stopband Attenuation (dB) Fs = 16000; % Sampling Frequency h = fdesign.decimator(2, 'Lowpass', 'fp,fst,ap,ast', Fpass, Fstop, ... Apass, Astop, Fs); Hd = design(h, 'equiripple', ... 'FilterStructure', 'firdecim', ... 'MinPhase', true, ... 'MinOrder', 'any', ... 'StopbandShape', 'flat');